BSTP 01 Safety stainless steel urinal
BSTP 01 is an integral stainless steel urinal with a built-in thermal sensor. A thermal sensor reacts to temperature changes in the siphon after use of the urinal. This thermal sensor generates a signal that is analyzed by the electronics, opens the electromagnetic valve and operates the flushing of the urinal. After 24 hours inactivity the urinal flushes itself.
The thermal sensor does not react to people standing near or passing by. The time setting for flushing is carried out without remote control. It is defined by switching off the source as described in the maintenance manual.
The construction of the flushing system allows its easy assembly requiring only connection and hanging onto a wall. The flushing system is protected against mechanical damage, even wilful, because all components are placed under the cover of the urinal.
BSTP 01 with a sensor controlled flushing system or a battery supplied version can be manufactured on a request.
BSTP 01 automatic stainless steel urinal, due to its high resistance to damage, is intended particularly for modernization of the prisons, diagnostic establishments and other institutions where security is paramount.
- stainless steel urinal
- thermal sensor
- electromagnetic valve
- corner valve with filter
- siphon + connecting hoses
|Water inlet||G 1/2“|
|Water pressure||0,1 – 1,0 MPa|
|Outlet||d = 50 mm|
|Adjustable time of flushing||1 – 20 sec. (adjusted to 5 sec.)|
|Power supply||12 V, 50 Hz|
|Power requirement||6 VA|
|Source of power supply||ZAC 1/20 (max. 3 x BSTP 01)|
|ZAC 1/50 (max. 8 x BSTP 01)|
- Set-up water inlet, pipe 1/2“ – as per picture
- Set-up outlet d = 50 mm
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC