AUZ 02 INV stainless free-standing water closet for disabled people
AUZ 02 INV is a stainless free-standing water closet for disabled people. The closet is based on standard AUZ 02 which is elevated and protracted to comply with the ordinance for products for disabled people. The pan is equipped by a plastic toilette seat from hardened plastic for higher comfort. The closet includes a removable back support recommended by the Wheelchair Association.
It is convenient in all places where it is not possible to use wall-hung toilet (e.g. in case of low carrying capacity of the wall). In standard version the outlet is directed into the floor. Outlet directed into the wall is possible on customer´s wish.
A set with an AUZ 3 INV automatic flushing system and KZ 1 cantilever or with any other flushing system including flushing cistern can be completed. Automatic flushing system AUZ is based on optoelectronic sensor. After use of toilet the electromagnetic valve is opened and follows automatic flushing.
The housing of the toilet is made from the stainless steel of 1,5 mm thickness, the sitting part of 2 mm thickness.
AUZ 02.INV is produced also in vandal-proof version (BSNZ 02.INV) which is intended particularly for modernization of the prisons, diagnostic establishments and other institutions where security is paramount. Vandal-proof version does not include sitting board, all the edges are grinded down.
AUZ 02.INV is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
AUZ 3 INV – pressure water automatic flushing system for disabled
|d = 34 - 50 mm
|d = 90 mm
- Set up water outlet into the floor according to the picture d = 110 mm with sealing rubber sleave for the pipe d = 90 mm
- Set up water inlet according to the picture d = 34 – 50 according to chosen sealing
- Set-up alcove for installation casket (only for AUZ 3)
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (only for AUZ 3)
- A –
- D –