Support grab bars
Floor-mounted support grab
Wall-mounted support grab barSupport grab bars can be used wherever it is necessary to create mobility support, support to make getting up from a wheelchair easier or support for any activity. There is a lot of leeway in the use of grab bars. Grab bars are either stationary, mounted to both the wall and floor or wall-mounted.
Grab bars are made with the following surface finish options:
- White, powder-coated
- Polished
- Brushed (matte)
With or without anchor screw covers.
Complete delivery
- Grab bar
- Fasteners
- Floor-mounted support grab bar:
- Dimensions: handle depth 813 mm
- Stainless-steel tube: d=32 mm;
- Wall-mounted support grab bar:
- Dimensions: handle depth 813 mm
- Stainless-steel tube: d=32 mm;
For installation, use a drill bit with a diameter matching that of the supplied wall plugs.
To attach the bar to a wall using the supplied screws and wall plugs, it is necessary to use all of the anchoring holes.
The supplied fasteners are intended for walls with adequate load-bearing capacity (solid brick, concrete). For walls made from different materials, it is necessary to choose appropriate fasteners.
