AUP 34 FUSION urinal with cover – incl. automatic intelligent (IQ) flushing system

AUP 34 (FUSION ceramics produced by HATRIA) is a design urinal with automatic intelligent (IQ) flushing device and cover designed especially to bathrooms in both homes and hotels. The AUP 33 automatic urinal is intended for toilettes where user comfort and hygiene are required together with economic use of water.
The electronics scans and assesses processes in the trap and upon the result it directs the device to flush. Only one litre is enough to flush the urinal. If somebody approaches the urinal without using it, the control electronics does not react. It prevents needless flushing in the case of incidental short-term entrance (passing by the bowl urinal, etc.). After 24 hours of no activity, the bowl urinal automatically flushes.

Construction of the flushing system allows easy installation comprising only connection and suspension of the ceramics on prepared wall. As all elements are incorporated in the ceramics, the flushing system is protected against mechanical injury, both incidental and intentional.The urinal does not contain any optical elements; therefore it removes disadvantages of sensor technology such as soiling or damaging of scanning diodes and their poor dark colour sensitivity.
Due to the cover use of the urinal is not suitable for public toilettes.

Package contents

  • ceramic urinal with cover
  • siphon with electronics
  • corner valve with filter
  • connecting hoses
  • electromagnetic valve
  • installation bolts
  • battery (only for AUP 34.B version)

NP 01 – st. steel dividing partition between two urinals
NP 02 – st. steel dividing partition between two urinals
ZAC – source of power supply 12V, 50Hz

Water inlet G 1/2"
Water pressure 1 - 10 Bar (AUP 34)
  2 - 8 Bar (AUP 34.B)
Outlet d = 50 mm
Time of flushing 1 – 20 s (adjusted to 5 s)
Power supply 12 V, 50 Hz (AUP 34)
  6 V (4x AA battery) - AUP 34.B
Power requirement 6 VA
Power supply unit ZAC 1/20 (max. 3x AUP 34)
  ZAC 1/36L (max. 6x AUP 34)
  ZAC 1/50 (max. 8x AUP 34)
Weight 14 kg
  • Set-up water inlet, pipe G 1/2“ – as per picture.
  • Set-up outlet d = 50 mm.
  • Set-up cable for power supply – 12 V, 50 Hz from source ZAC (for AUP 34).

  • A
    water inlet pipe G 1/2"
  • n

  • D
    outlet d = 50 mm