BSNZ 02 INV vandal-proof stainless steel free-standing toilet for handicapped people
BSNZ 02 INV is a vandal-proof stainless steel toilet without automatics which is intended for free-standing. The closet is based on standard BSNZ 02 which is elevated and protracted to comply with the ordinance for products for disabled people.
It is convenient in all places where it is not possible to use wall-hung toilet (e.g. in case of low carrying capacity of the wall). In standard version the outlet is directed into the floor. Outlet directed into the wall is possible on customer´s wish. The housing of the toilet is made from the stainless steel of 2 mm thickness, the sitting part of 4 mm thickness. For higher comfort of the user are the edges of the sitting part grinded down.
The closet is also produced in standard version (AUZ 02 INV) which is made from the stainless steel sheet of 1,5 mm thickness, sitting part of 2 mm thickness and is quipped with plastic sitting board.
BSNZ 02 INV is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
- Stainless steel closet
- Fixing material
|Water inlet||d = 34 –50 mm|
|Min. required water flow||70 litrů/min|
|Outlet||d = 90 mm|
- Set-up outlet d = 110 mm according to the scheme with the rubber sleeve for the pipe d = 90 mm
- Water installation set up as per picture d = 34 - 50 mm according to chosen sealing
- A –
- D –