AFO 01 stainless steel wall-mounted drinking fountain
AFO 01 is a stainless steel wall-mounted drinking fountain of modern design with a manual press valve that allows its easy use. The water flows only when the valve is pressed and then there is a certain adjusted time to rinse out the nozzle.
The water inlet is fitted with a flexible hose, the siphon is made from a stretchy, flexible connector. The flexible finish of the water inlet and outlet allows the variable and problem-free connection of the fountain.
AFO 01 stainless steel fountain is suitable mainly for schools, medical facilities and spa resorts, and is utilizable outdoors.
AFO 01 is made of stainless steel AISI 304.
AFO 01.CL is made of stainless steel AISI 316 and is suitable into the areas with higher concentration of chlorine (e.g. swimming pools).
Sensor-controlled fountain possible made to order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
- stainless steel sink with casing
- press valve
- corner valve with filter
- flexible hose siphon
- fixing bar
- connecting hoses
- anchoring material
|Water inlet||G 1/2"|
|Water pressure||0,2 – 0,6 MPa (recommended 0,3 MPa)|
|Outlet||d = 40 mm|
|Inner dimension of the fountain||d = 245 mm|
- Set-up water inlet - pipe 1/2“
- Set-up drainage d = 40 mm
- A – water inlet G 1/2" inner
D – water outlet d = 40 mm
Scheme of hanging