AFO 01.Y st. steel sensor controlled drinking fountain
AFO 01.Y is st. stainless wall hung drinking fountain controlled by sensor. Water runs after disrupting the scanning zone.
Fountain is made by welding all components together.
Fountain is suppplied with safety power 12 V, 50 Hz from power supply ZAC (AFO 01.Y) or with 4x AA battery (AFO 01.YB).
Material is standardly st. steel AISI 304 or can be AISI 316 (AFO 01.Y.CL or AFO 01.YB.CL).
St. steel driking fountain AFO 01.Y is based on favourite model AFO 01 with manual control.
The sensor, located on the right side of the fountain, is reacting on the approach of the user. Water starts to run from the nozzle, located in the middle of the fountain bowl, and runs over the time when the user´s head is in the scanning zone (max. 30 sec.) + preset time (max. 4 sec.) to clean the nozzle.
- st. steel drinking fountain
- sensor and electronic
- electromagnetic valve
- connecting flexible hose
- corner valve with filters
- mounting material
|water inlet||G 1/2"|
|water pressure||1 - 10 Bar (AFO 01.Y; AFO 01.Y.CL)|
|2 - 8 Bar (AFO 01.YB; AFO 01.YB.CL)|
|outlet||d = 40 mm|
|bowl inner dimension||d = 245 mm|
|suppply||12 V, 50 Hz (AFO 01.Y; AFO 01.Y.CL)|
|6 V - 4 x AA battery (AFO 01.YB; AFO 01.YB.CL)|
|power supply||ZAC 1/20 (max. 3 x AFO 01.Y ; AFO 01.Y.CL)|
|ZAC 1/50 (max. 8 x AFO 01.Y ; AFO 01.Y.CL)|
|ZAC 1/36L (max. 6 x AFO 01.Y ; AFO 01.Y.CL)|
- Seet up outlet d = 40 mm according to data sheet
- Set up water inlet according to data sheet
- Set up cable for power supply (12 V, from ZAC - only for 12V version)
- A – water inlet G 1/2"
- C – electricity supply CYKY 2A x 1,5
- D – water outlet d = 40 mm
- J – nozzle
- Y – sensor
Scheme of hanging