KB1 cantilever for wall hung bidet

Our cantilevers assure a steady load between the floor and the walling. This allows the wall-hang closets to be fixed onto the walls with a lower load capacity. Cantilevers are not suitable for mounting onto a plaster slabs. It is possible to fix the cantilever by notching or by using a frontal brick walling.
The KB 1 cantilever is intended for hanging a bidet bowl onto bearing pins.
Advantages of the KB 1:
– for hanging bidets with spacing of assembly screws 180 and 230 mm
– setting of the sitting height in the range of 390 – 490 mm
– wide range of interact spacing between assembly screws, connecting armatures and the outlet pipe.

    • A
      water inlet


  • B
    water outlet