AUM 17 automatic sensor-controlled tap with mixing valve
AUM 17 is an automatic sensor-controlled tap with mixing valve.
Water turns on automatically when hands are within the sensor’s range and keeps on running for a short period of time after the hands have been removed from the scanning zone – after-flow delay time. The water stops flowing automatically if the sensor has been screened for longer than 30 seconds. The water temperature can be easily set by turning the upper ring on the tap.
Automatic sensor-controlled taps AUM 17 meet EU standards and are intended for facilities where the user’s comfort and the maintenance of hygiene is required at maximum water savings.
Package contents
- faucet with mixing valve
- electronics with a holder for hanging
- electromagnetic valve (AUM 17, 17.B – 2 pcs.)
- corner valve with filter (AUM 17, 17.B – 2 pcs.)
- mixing T – part with a cap nut (AUM 17.E)
- battery holder (AUM 17.B)
- cylindrical batteries 1,5 V (AUM 17.B) – 4 pcs
- connecting hoses
- fixing strap
- M8 screw with nut and pads – 2 pcs
- tube with mastic
| Radius of sensor | automatically adjusted (other radius with remote ctrl.DO) |
| Water inlet | G 1/2“ |
| Water pressure | 0,2 – 0,8 MPa (AUM 17.B) |
| 0,1 – 1,0 MPa (AUM 17) | |
| 0,2-0,6 MPa without fluctuation and bubbles – recommended 0,3 Mpa (AUM 17.E) | |
| Diameter of installation opening in washbasin | 0 – 4 sec. (adjusted to 1 sec.) |
| Power supply | 12 V, 50 Hz (AUM 17, AUM 17.E) |
| 6 V DC (AUM 17.B) | |
| Power requirement | ZAC 1/20 (max. 2 x AUM 17) |
| ZAC 1/50 (max. 5 x AUM 17) | |
| AA batteries – 1,5 V (AUM 17.B) – 4 pcs. | |
| Operating life of batteries | approx. 1,5 year at 100 operations a day |
| Weight | 2,7 kg |
- Set-up water inlet, pipe 1/2“ – as per picture
- Set-up outlet – as per siphon
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (does not apply to AUM 17.B)
- Ceramics of the washbasin assembled as per picture
