AUP 29 APOLLO urinal with automatic flushing system
AUP 29 (ceramics APOLLO produced by Cersanit) is a ceramic urinal with integrated automatic flushing. The electronics scans and assesses processes in the trap and upon the result it directs the device to flush. Only one litre is enough to flush the bowl urinal. If somebody approaches the bowl urinal without using it, the control electronics does not react. It prevents needless flushing in the case of incidental short-term entrance (passing by the bowl urinal, etc.). After 24 hours of no activity, the bowl urinal automatically flushes.
Construction of the flushing system allows easy installation comprising only connection and suspension of the ceramics on prepared wall. As all elements are incorporated in the ceramics, the flushing system is protected against mechanical injury, both incidental and intentional. The bowl urinal does not contain any optical elements; therefore it removes disadvantages of sensor technology such as soiling or damaging of scanning diodes and their poor dark colour sensitivity.
The ceramic urinal AUP 29 is intended for social facilities where the user’s comfort and the maintenance of hygiene is required at maximum water savings.
- ceramic SPHINX urinal
- self-priming siphon with sensor and electronics
- electromagnetic valve
- corner valve with filter
- connecting hoses
- battery holder (AUP 29.B)
- cylindrical batteries 1,5 V (AUP 29.B) – 4 pcs.
- anchoring screw with cup – 2 pcs.
NP 01 – stainless steel partition for urinals
ZAC – power supply unit
|Water inlet||G 1/2“|
|Water pressure||0,2 – 0,8 MPa (AUP 29.B)|
|0,1 – 1,0 MPa (AUP 29)|
|Outlet||d = 5O mm|
|Adjustable time of flushing||1 – 16 s (adjusted to 5 s)|
|Power supply||12 V, 50 Hz (AUP 29)|
|6 V DC (AUP 29.B)|
|Power requirement||6 VA (AUP 29)|
|Power supply unit||ZAC 1/20 (max. 3 x AUP 29)|
|ZAC 1/50 (max. 8 x AUP 29)|
|AA batteries – 1,5 V (AUP 29.B) – 4 pcs.|
|Operating life of batteries||approx. 1,5 years at 100 flushes a day|
|Minimum water flow capacity||12 l / min.|
- Set-up water inlet, pipe 1/2“ – as per picture
- Set-up outlet d = 50 mm
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (not for AUP 29.B)
- A –
water inlet G 1/2" inner winding
- C –
electricity supply 12V, 50Hz
- D –
water outlet d = 50 mm
- E –
siphon with electronics