BSZA 01 anti-vandal subsurface shower unit
BSZA 01 is an anti-vandal subsurface shower unit. It is intended for paid water take-off in the facilities where security is paramount and where the possibility of its damage, even wilful, needs to be reduced to the minimum (prisons, diagnostic establishments, public showers…). A front panel is manufactured out of stainless steel plate 3 mm thick and it is equipped with an anti-vandal thermostatic valve. The token box is accessible through the other side of the wall. Sand blasted finish guarantees its easy maintenance.
A special shaped token is used for its activation. After inserting a token, water starts to flow for preconfigured period of time. The user operates the shower by pressing a START/STOP button. When last minute of the showering time is left, the user is given notice by interrupted water flow that the showering time is getting to its end.
Package contents
- stainless steel casing with thermostatic valve (BSZA 01.TV)
- token scanner
- electronics
- corner valve (BSZA 01.1-1x, BSZA 01.TV-2x)
- electromagnetic valve
- token box
- fittings
| Size of the front panel | 250 x 500 mm |
| Required thickness of the wall | Minimum 100 mm |
| Type of token | ZT 1 |
| Water pressure | 0,1 – 1,0 MPa |
| Adjustable time of the water flow | 10 s – 42,5 min, after 10 s |
| Total operating time | 2 x of the preconfigured period of the water flow |
| Power supply | 12 V, 50 Hz |
| Power requirement | 6 VA |
| Source of power supply | ZAC 1/20, 1/50 |
- Set up alcove for installation
- Set up water inlet
- Set up cable for power supply 12 V, 50 Hz (ZAC)
-
- A –
cold water
- A –
n
-
- B –
hot water
- B –
n
-
- C –
electricity inlet
- C –
n
- O –
water outlet to the shower
