PZ 014L, PZ 014P trough for embedding of tiles, paving – to the corner
PZ 014L, PZ 014P are floor draining troughs for embedding of tiles. These floor troughs represent a modern trend in draining of shower units, entire bathrooms or other spaces. It is a clear and practical solution as far as their design is concerned, replacing the already out-of-date shower baths.
The PZ 014L and PZ 014P troughs are designated to a single vertical wall – back vertical edge for damp-proofing, other ones horizontal. Total trough height for tiles just 110 mm. The troughs are supplied with rust-free outfall of d = 50 mm in the middle that can be turned by 360° to enable further connection. As standard, troughs are made in lengths for a shower unit of 800 and 900 mm. Other lengths precisely in accordance with your project can be produced to order. Troughs can go with adjusting legs for easier putting it to a level.
This product is manufactured from the stainless steel AISI 304. For cleaning we recommend WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
- stainless steel draining trough
- stainless steel outlet including waste trap
|Possible lengths||Designed for a shower unit of 800 and 900 mm|
|Outlet||d = 50 mm|
|Max. water flow||30 lt/min|
|Material||st.steel AISI 304 (on order AISI 316)|
|Material thickness||1,5 mm (grating 2mm]|
|Weight||5-6 kgs according to the version type and length|
- Set-up floor opening of dimensions according to the trough fitting technical drawing
- Outlet for connection to trough outlet of d = 50 mm ready
PZ 011L (PZ 011P mirror reverse)