AUL 03 stainless steel wash troughs

AUL 03 is a stainless steel wash troughs with sensor-controlled outflow arms. Water turns on automatically when the user’s hands are placed within the sensor’s range and turns off when they have been removed. Water stops running with a certain delay after the hands have been removed from the scanning zone. The trough is produced in a wall-hang version (AUL 03.Z) or fixed on a column (AUL 03.S). The water temperature is set by means of a thermostatic valve.
Wash trough can be additionally equipped with soap dispensers and disinfection lotions, paper towel dispensers, waste receptacles and other accessories. The standard version of the troughs is right (from front view) in accordance with water inlet and outlet.

Package contents

  • trough with sheathing and rear facing
  • column (only AUL 03S)
  • outflow arms (2 – 4 pcs as per type of trough)
  • electronics with photocell (2 – 4 pcs as per type of trough)
  • electromagnetic valves (2 – 4 pcs as per type of trough)
  • corner valves – 2 pcs
  • thermostatic valve – 1 pc
  • connecting hoses
  • fittings
  • siphon
Product code Product name Price Price (VAT)
AUL 03S.1 On demand On demand
AUL 03S.2 On demand On demand
AUL 03S.3 On demand On demand
AUL 03S.4 On demand On demand
AUL 03Z.1 On demand On demand
AUL 03Z.2 On demand On demand
AUL 03Z.3 On demand On demand
AUL 03Z.4 On demand On demand
Water inlet G 1/2“
Outlet d = 40 mm
Power supply 12 V, 50 Hz
Source of power supply ZAC 1/20 (AUL 03.1 až .2)
ZAC 1/50 (AUL 03.3)
AUL 03.1
Number of taps 2
Power requirement 12 VA
Weight 40 kg (AUL 03Z.1 – 37 kg)
AUL 03.2
Number of taps 3
Power requirement 18 VA
Weight 50 kg (AUL 03Z.2 – 46 kg)
AUL 03.3
Number of taps 4
Power requirement 24 VA
Weight 60 kg (AUL 03Z.3 – 55 kg)
AUL 03.4
Number of taps 5
Power requirement 30 VA
Weight 70 kg (AUL 04Z.3 – 64 kg)
  • Set up water inlet at the height of 400 mm from floor level and approx. 300 mm from a specified end of the trough
  • Set up outlet d = 40 mm in the height f 400 mm from floor level and approx. 150 mm from a specified end of the trough
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC in the height of 400 – 500 mm, approx. 300 mm from end of trough where water inlet is set

    • A – cold water inner pipe G 1/2"
    • B – hot water inner pipe G1/2"
    • C – electricity supply
    • D – outlet
    • E – zone of scaning