AUZ 01 stainless steel wall-hung WC pan
AUZ 01 is a stainless steel wall-hung WC pan in matt (ballotini sandblasted) design. Delivery includes grey seat made of hardened durable plastic (black seat is possible on order under the stock code AUZ 01.CS). The AUZ 01 assembly holes are the same as for any commonly used ceramic closet.
A set with an AUZ 3 automatic flushing system and KZ 1 cantilever; with an AUZ 3.P flushing system for disabled; with an AUZ 5-II in-wall toilet module flushing system; with a vandal resistant automatic flushing system BSAZ 01 or BSAZ 5 a vandal-resistant in-wall toilet module flushing system can be completed. Because of its high resistance to damage, the AUZ 01 is intended mainly for social facilities with expected higher loads, such as highway lay-bays, public houses etc. where easy hygiene maintenance is required. AUZ 01 is also manufactured in the design for the disabled under the stock code AUZ 01 INV.
Further closet versions can be found in the section Stainless-steel closets or Stainless-steel safety closets.
AUZ 01 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order.
For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
- stainless steel WC
- plastic seat
- anchoring material
KZ 1 – cantilever of the wall-hang WC pan
AUZ 3 – automatic pressure flushing system
AUZ 3.P – automatic pressure flushing system with piezo control
AUZ 5-II – automatic flushing system in the in-wall module
BSAZ 01 – vandal resistant pressure flushing system
BSAZ 5 – vandal resistant flushing system in the in-wall module
|Water inlet||d = 34 - 50 mm|
|Minimum water flow capacity||70 l/min.|
|Outlet||d = 90 mm|
|Required spacing between bolts||180 mm|
- Set-up water inlet d= 34-50 mm according to chosen sealing.
- Set-up outlet d = 110 mm including rubber sleeve for pipe d = 90 mm.
- Set-up the cantilever or other system for hanging the WC pan
- A –
- A –
- D –