AUP 41 FUSION urinal incl. automatic intelligent (IQ) flushing system

AUP 41 (FUSION ceramics produced by Italian producer Hatria) is a design urinal with automatic intelligent (IQ) flushing device. The electronics scans and assesses processes in the trap and upon the result it directs the device to flush. Only one litre is enough to flush the urinal. If somebody approaches the urinal without using it, the control electronics does not react. It prevents needless flushing in the case of incidental short-term entrance (passing by the urinal, etc.). After 24 hours of no activity, the urinal automatically flushes.

Construction of the flushing system allows easy installation comprising only connection and suspension of the ceramics on prepared wall. As all elements are incorporated in the ceramics, the flushing system is protected against mechanical injury, both incidental and intentional.The urinal does not contain any optical elements; therefore it removes disadvantages of sensor technology such as soiling or damaging of scanning diodes and their poor dark colour sensitivity.

The AUP 41 automatic urinal is intended for toilettes where user comfort and hygiene are required together with economic use of water.

Package contents

  • ceramic urinal FUSION (producer Hatria)
  • electronics with sensor
  • electromagnetic valve
  • corner valve with filter
  • self-priming siphon
  • connecting hoses
  • installation bolts with cover – 2 pcs.

NP 01 – st. steel dividing partition between two urinals
NP 02 – st. steel dividing partition between two urinals
ZAC – source of power supply 12V, 50Hz

Water inlet G 1/2“
Water pressure 1 - 10 Bar (AUP 41)
  2 - 8 Bar (AUP 41.B)
Outlet d = 50 mm
Time of flushing 1 - 20 s (adjusted to 5 s)
Power supply 12 V, 50 Hz (AUP 41)
  6 V DC (AUP 41.B)
Power requirement 6 VA (AUP 41)
Power supply unit ZAC 1/20 (max. 3x AUP 41)
  ZAC 1/36L (max. 6x AUP 41)
  ZAC 1/50 (max. 8x AUP 41)
  AA batteries – 1,5 V (AUP 41.B)
Weight 13 kg
  • Set-up water inlet, pipe G 1/2“ – as per picture.
  • Set-up outlet d = 50 mm.
  • Set-up cable for power supply – 12 V, 50 Hz from source ZAC (for AUP 41).

  • A
    water inlet pipe G 1/2" - inner winding
  • n

  • C
    el. cable CYKY 2A x 1,5 (AUP 41)
  • n

  • D
    outlet (d = 50 mm)