Logo - AZP Brno s.r.o. Choose more than sensor...
safety section
safety section

ISO 9001:2008



BSNZ 01

Safety stainless steel toilet

BSNZ 01 Safety stainless steel toilet

BSNZ 01 is a stainless steel wall-hung closet with satin finish. Assembly inlets are the same as for any commonly used ceramic closet.

A set with AUZ 3 automatic flushing system and KZ 1 cantilever or with AUZ 5 (in-wall toilet module) flushing system can be completed. The AUZ 3 and AUZ 5 flushing systems and KZ1 cantilever have to be ordered separately. Automatic flushing system uses photocell sensor for contactless control. After leaving the scanning zone, the flushing system is activated. AUZ 3 flushing system brings maximum water savings.

Because of its high resistance to damage, BSNZ 01 is intended particularly for modernization of the prisons, diagnostic establishments and other institutions where security is paramount.

Basic technical information
Water inlet:d = 34 mm
Minimum water flow capacity:70 l/min.
Outlet:d = 90 mm
Required spacing between bolts:180 mm
Weight:11 kg
b
Requirements for setting up the construction
  1. Water installation set up as per picture
  2. Set-up alcove for installation casket (only for AUZ 3)
  3. Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (only for AUZ 3)
  4. Set-up outlet d = 90 mm as per picture
  5. Set-up the cantilever or other system for hanging the closet
b
Complete delivery
  • stainless steel closet
  • anchoring material
b
Made to order
  • KZ 1 - cantilever of the wall-hang closet
  • AUZ 3 - automatic flushing system of the closet
  • AUZ 5 - automatic flushing system in the in-wall module
b
Product title
BSNZ 01 -
Safety stainless steel toilet, wall mounted
b
Download information about the product
dwgBSNZ 01 data for projectants - ( 42 kB )
b


© 2008 AZP Brno s.r.o.