Logo - AZP Brno s.r.o. Choose more than sensor...
stainless steel program
stainless steel program

ISO 9001:2008



ADR 01

automatic disinfection for hands

ADR 01 automatic disinfection for hands

The ADR 01 is a stainless steel device enabling an automatic disinfection of hands by a spray application of disinfecting solution. An aerosol spray application is automatically carried out after both hands are simultaneously inserted into the slot of the disinfecting device. A green pilot light indicates proper observation of the disinfecting process and the person is allowed to walk through. If the person did not use the disinfecting device properly, a red pilot light turns on and sound signalization is activated. The sound signalization can be turned off by placing both hands into the disinfecting device.

ADR 01.1 and ADR 01.2 versions are equipped with a sensor-controlled cross-bar which monitors disallowed through-pass and activates a sound signalization. The cross-bar is located under the canister with disinfecting solution with the possibility of right or left positing. ADR 01.2 version enables return pass without the necessity of hand disinfection.

A deaeration of the system is necessary when exchanging canisters with disinfecting solution.

The device does not need an outlet for excess disinfecting solution. Solution is spirit-based and evaporates after usage. The ADR 01 is intended to be wall mounted.

Canister with disinfecting solution is not part of delivery.

Version types
ADR 01.1 - enables only one way pass-through
ADR 01.2 - enables two-way pass-through
b
Basic technical information
Radius of sensor:0,1 – 0,9 m
Power supply:12 V, 50 Hz
Power requirement:resting state 10 VA
 when dosing 45 VA
Electricity protection:IP 55
Source of power supply:ZAC 1/50 (max. 1 x ADR 01)
Weight:13 kg
b
Requirements for setting up the construction
  1. Setup cable for power supply – 12 V, 50 Hz from source of power supply ZAC
b
Complete delivery
  • body of the device
  • sensor-controlled cross-bar (ADR 01.1 – 1 pc, 01.2 – 2 pcs)
  • lapped frame
  • chamber with nozzles
  • pump
  • jerican holder
  • priming hose
  • sonic alarm (ADR 01.1, .2)
  • magnet
b
Figure

Figure - ADR 01 automatic disinfection for hands
b
C -electricity supply
E -sensor crossbar (ADR 01.1, .2)
E* -sensor crossbar (ADR 01.2)
K -canistr
b
b
Product title
ADR 01.1 -
automatic disinfection for hands with one-way sensor bar - 12 V, 50 Hz
ADR 01.2 -
automatic disinfection for hands with two-way sensor bar - 12 V, 50 Hz
b
Download information about the product
dwgADR 01.1 data for projectants - ( 152 kB )
dwgADR 01.2 data for projectants - ( 152 kB )
dwgADR 01.3 data for projectants - ( 152 kB )
b


© 2008 AZP Brno s.r.o.