AUM 1-II with temperature selector

Choose more than sensor...

aqua program

ISO 9001:2008

AZP Brno s.r.o. » products » aqua program » automatic taps for washbasins » AUM 1-II with temperature selector

		AUM 1-II with temperature selector

AUM 1-II is an automatic sensor-controlled tap for washbasins with temperature selector. AUM 1-II is replacing AUM 1 tap, which production was finished. The function of the tap is same, design is different.

Water turns on automatically when the user's hands are within the sensor's range and turns off when they have been removed. Water keeps on running for a short period of time after the hands have been removed from the scanning zone – after-flow delay time. The water stops flowing automatically if the sensor has been screened for longer than 30 seconds.

The water temperature is easily set, as per the individual requirements of each user, by means of a cartouche (mixing chamber) temperature selector.

Automatic sensor-controlled taps AUM 1-II meet EU standards and are intended for every operation where customers comfort while saving water is required

Version types
AUM 1-II - automatic tap supplied with a.c. voltage of 12 V from a safety source of power supply ZAC
AUM 1.B-II - automatic tap supplied with d.c. voltage of 6 V from cylindrical batteries
AUM 1.E-II - automatic tap for non-pressure through-flow or reservoir heaters

Basic technical information
Radius of sensor:	self-adjusted (other possible with remote control DO)
Water inlet:	G 1/2"
Water pressure:	0,2 - 0,8 MPa (AUM 1.B-II)
	0,1-1,0 MPa (AUM 1-II)
	0,3 MPa (AUM 1.E-II)
Diameter of installation opening in washbasin:	min. 33 mm
Adjustable time of water flow:	0-4 s (adjusted to 1s)
Power supply:	12 V, 50 Hz (AUM 1-II, AUM 1.E-II)
	6 V DC (AUM 1.B-II)
Power requirement:	ZAC 1/20 (max. 2 x AUM 1-II and 3 x AUM 1.E-II)
	ZAC 1/50 (max 5 x AUM 1-II and 8 AUM 1.E-II)
	AA batteries - 1,5 V (AUM 1.B-II) - 4 pcs.
Operation life of batteries:	aprox. 1,5 years
Weight:	2,5 kg

Requirements for setting up the construction
Set-up water inlet, pipe 1/2“ – as per picture Set-up outlet – according to the siphon used Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (not for AUM 1.B-II) Ceramics of the washbasin assembled as per picture

Complete delivery
mixing tap photocell head electronics with a holder for hanging electromagnetic valve (AUM 1-II, 1.B-II – 2 pcs) corner valve with filter (AUM 1-II, 1.B-II – 2 pcs) mixing T – part with a cap nut (AUM 1.E) battery holder (AUM 1.B-II) cylindrical batteries 1,5 V (AUM 1.B-II) - 4 pcs connecting hoses fixing strap M8 screw with nut and pads tube with silicon mastic

Made to order
ZAC - source of power supply

Figure